DC Uxz DC

Discussion in 'Tutorials Pending Approval' started by Uxz', May 16, 2018.

  1. Uxz'

    Uxz' Member

    Hi Uxz here,
    I wanted to share you guys a tutorial of my personal Mod. My English isnt very well but i hope you understand the steps :)


    [​IMG]

    Length : 21,5cm (optional)
    Weight : 14-15 grams

    Materials:
    - 2x Signo Tips
    - 1x SuperPirat (optional Comssa Body)
    - 2x G2 Grips (main grips)
    - 1x G2 Grip (you will need only 2x 4 Stripes)
    - 1x Signo Dx Grip (you will need 2x 9mm)
    - 2x Reynolds 094
    - 1x Comssa Backplug
    - Decorate Parts

    [​IMG]

    Body:

    1. Take your SuperPirat Body. Cut 2cm from back end and clean it (with aceton).

    [​IMG]
    2. Take your Comssa Backplug and cut it right where the first lip is

    [​IMG]
    3. Connect both - Body done

    [​IMG]

    Cap:

    1. Cut your Grips (2x 4stripes G2 and 2x 9mm Signo Dx)

    [​IMG]
    2. In this Step you should be patience! First of all take your Signo Tip and your 9mm Signo DX Grip. Push your Signo Grip into your G2 Grip. After your Grip looks like that (Picture 2) you take out your tip and do the same thing with your cuttet 4stripes G2 Grip.
    Tip: Use your tapel and press the grip down (picture 4). You can also use water if you need.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    3. Take your Reynolds Cap decorate it and press your G2 Grip above - Cap done

    [​IMG]
    [​IMG]
    4. Use tape and connect your Caps with your body

    [​IMG]

    Finish:

    [​IMG]
    A different Version:

    [​IMG]
     
    Last edited: May 16, 2018
    Nyx and Timel3ss like this.

Share This Page